GiB to TiB Converter
Convert gibibytes to tebibytes — divide by 1,024. Results update as you type; exact factors shown.
One gibibyte (2³⁰) is 0.001 tebibyte (2⁴⁰) — see the exact factor, not a rounded rule of thumb.
How the gib to tib converter works
Storage converts through the byte (8 bits). Drive makers and network speeds use decimal prefixes (1 GB = 10⁹ bytes); operating systems often report binary units (1 GiB = 2³⁰ = 1,073,741,824 bytes) — sometimes labelled "GB". The gap is 7.4% at the gigabyte and 10% at the terabyte.
The UK is metric for most trade and science but keeps miles, pints, stone and mpg (with the imperial gallon) in daily life.
Common data conversions
| From | To | Units |
|---|---|---|
| 100 GiB | 0.0977 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 256 GiB | 0.25 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 512 GiB | 0.5 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 1,024 GiB | 1 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 2,048 GiB | 2 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 4,096 GiB | 4 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 8,192 GiB | 8 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 10,000 GiB | 9.7656 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 16,384 GiB | 16 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 20,480 GiB | 20 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 51,200 GiB | 50 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
| 102,400 GiB | 100 TiB | gibibyte (2³⁰) to tebibyte (2⁴⁰) |
Units in this converter and their exact factors
| Unit | Symbol | One unit in bytes |
|---|---|---|
| bit | bit | 0.125 byte |
| byte | B | 1 byte |
| kilobyte (10³) | kB | 1,000 byte |
| megabyte (10⁶) | MB | 1,000,000 byte |
| gigabyte (10⁹) | GB | 1,000,000,000 byte |
| terabyte (10¹²) | TB | 1,000,000,000,000 byte |
| kibibyte (2¹⁰) | KiB | 1,024 byte |
| mebibyte (2²⁰) | MiB | 1,048,576 byte |
| gibibyte (2³⁰) | GiB | 1,073,741,824 byte |
| tebibyte (2⁴⁰) | TiB | 1,099,511,627,776 byte |
FAQFrequently asked questions about data conversion
How many GiB in a TiB?
1,024.
What is 8,192 GiB?
Eight tebibytes.
What is 1,000 GiB?
0.977 TiB.
Why not just use decimal?
Because filesystems and memory genuinely work in powers of two. The binary units describe the hardware honestly.
What is a petabyte in TiB?
About 909 TiB.
Where these figures come from
- BIPM — The International System of Units (SI Brochure, 9th edition) — definitions of the base and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of Units — the exact conversion factors used here.
- National Physical Laboratory (NPL) — United Kingdom's national measurement authority.
Last checked: September 2026. Conversion factors are fixed by definition and do not change with tax years or regulations.