Metres to Miles Converter
Convert metres to miles — 1,609.344 metres to the mile. Results update as you type; exact factors shown.
One metre is 0.0006 miles — see the exact factor, not a rounded rule of thumb.
How the metres to miles converter works
Every length is converted through the metre, the SI base unit of length. The inch has been defined as exactly 25.4 mm since the 1959 international yard and pound agreement, so a foot is exactly 0.3048 m, a yard 0.9144 m and a statute mile 1,609.344 m. The nautical mile is 1,852 m by international definition.
The UK is metric for most trade and science but keeps miles, pints, stone and mpg (with the imperial gallon) in daily life.
Common length conversions
| From | To | Units |
|---|---|---|
| 100 m | 0.0621 mi | metres to miles |
| 400 m | 0.2485 mi | metres to miles |
| 800 m | 0.4971 mi | metres to miles |
| 1,000 m | 0.6214 mi | metres to miles |
| 1,500 m | 0.9321 mi | metres to miles |
| 1,609 m | 0.9998 mi | metres to miles |
| 3,000 m | 1.8641 mi | metres to miles |
| 5,000 m | 3.1069 mi | metres to miles |
| 10,000 m | 6.2137 mi | metres to miles |
| 21,100 m | 13.1109 mi | metres to miles |
| 42,195 m | 26.2188 mi | metres to miles |
| 100,000 m | 62.1371 mi | metres to miles |
Units in this converter and their exact factors
| Unit | Symbol | One unit in metres |
|---|---|---|
| millimetre | mm | 0.001 metre |
| centimetre | cm | 0.01 metre |
| metre | m | 1 metre |
| kilometre | km | 1,000 metre |
| inch | in | 0.0254 metre |
| foot | ft | 0.3048 metre |
| yard | yd | 0.9144 metre |
| mile | mi | 1,609.344 metre |
| nautical mile | nmi | 1,852 metre |
FAQFrequently asked questions about length conversion
How many metres in a mile?
1,609.344 exactly.
How far is 5,000 m in miles?
3.107 miles.
Is 1,500 m a mile race?
Close — the metric mile is 1,609 m, so 1,500 m is about 109 m short.
How many laps is a mile?
Just over four on a 400 m track.
Where these figures come from
- BIPM — The International System of Units (SI Brochure, 9th edition) — definitions of the base and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of Units — the exact conversion factors used here.
- National Physical Laboratory (NPL) — United Kingdom's national measurement authority.
Last checked: September 2026. Conversion factors are fixed by definition and do not change with tax years or regulations.