Round Pool Volume Calculator
The water volume of a round pool — with the chlorine dose, fill time and the weight it puts on the ground.
How much water a round pool holds.
How the round pool volume calculator works
A round pool is πr²d, using the *average* depth if the floor slopes. For a pool that runs from 1.0 m to 1.8 m, use 1.4 m — not the deep end.
The volume then drives everything else: chemical dosing is per 10,000 liters, filter turnover is sized from it, and the weight it puts on the ground is a tonne per cubic meter.
Formula: V = π r² × average depth
Worked examples
| Inputs | Volume | Note |
|---|---|---|
| A 4.5 m pool, 1.2 m deep | 19,085 L | 19,085 liters |
| A larger pool | 39,584 L | 39,584 liters |
| A small above-ground pool | 5,301 L | 5,301 liters |
FAQFrequently asked questions
Which depth should I use if the floor slopes?
The average of the shallow and deep ends. Using the deep end alone can overstate the volume by half.
How much does the water weigh?
One tonne per cubic meter. A 19,000 liter pool is 19 tonnes, which matters a great deal for above-ground installations and for what is beneath them.
How long does it take to fill?
At a typical 20 L/min garden tap, a 19,000 liter pool takes about 16 hours.
What pump flow do I need?
Enough to turn the whole volume over in about six hours — roughly 53 L/min for a 19,000 liter pool.
How do I dose chlorine?
Granular chlorine at about 65% available chlorine needs roughly 1.5 g per 1,000 liters per ppm. Always follow the product's own directions.
Where these figures come from
- The Engineering ToolBox — material densities, coverage and unit data — bulk densities, concrete at 2,400 kg/m³, board and sheet sizes
- Gypsum Association — gypsum board sizes — 4 × 8 and 4 × 12 ft sheets
- ADA Standards for Accessible Design — ramps (§405) — maximum running slope 1:12
- International Code Council — the International Residential Code
Last checked: September 2026. Coverage rates and material sizes are typical manufacturer figures — check the product you buy.