Aquarium Volume Calculator
An aquarium's volume from its inside measurements — litres and US gallons, the usable water after substrate and freeboard, a rough stocking guide and what the filled tank weighs.
Volume in litres is length × width × height in centimetres ÷ 1000; a US gallon is 3.
How the aquarium volume calculator works
Volume in litres is length × width × height in centimetres ÷ 1000; a US gallon is 3.785 litres. Usable water is the volume less what substrate and freeboard take (about 10%). The stocking guide is the old rule of thumb — about 1 cm of adult fish per litre for a community freshwater tank. The filled weight is the water (1 kg a litre) plus substrate and the glass, which is what a stand must carry.
Formula: Litres = L × W × H ÷ 1000 · US gal = L ÷ 3.785
How the volume is worked out
Centimetres in, litres out
A rectangular tank's volume is simply length × width × height in centimetres ÷ 1,000. The divide-by-1,000 isn't a fudge factor — one litre is exactly 1,000 cubic centimetres, so the conversion is precise. Measure the glass front to back for the width (also called the depth), and floor to rim for the height.
Full volume vs the water actually in there
That figure is the tank's geometric volume, and it's the number on the box. The water in it is always less: substrate takes up the bottom few centimetres, rocks and wood displace more, and you leave a gap at the top — the freeboard — so the tank doesn't slop over and the surface can break for gas exchange. A realistic working figure is about 90% of the full volume, and that's the default here. Use the water figure, not the box figure, when you dose medications or conditioners — dosing to the label size on a heavily scaped tank quietly overdoses it.
Gallons — and which gallon
US gallons = litres ÷ 3.785. Imperial (UK) gallons = litres ÷ 4.546. They're about 20% apart, so don't mix them up. It matters because the aquarium hobby's online centre of gravity is American: a "10 gallon tank" in a forum post means roughly 38 litres, not 45. Australian retailers price and label in litres, so the safest habit is to convert an American figure once, then think in litres from then on.
Worked example
A classic starter tank at 60 × 30 × 30 cm gives 60 × 30 × 30 = 54,000 cm³ = 54 litres, which is about 14 US gallons (or 12 imperial). At a 90% fill that's roughly 48.6 litres of water — about 48.6 kg, since water weighs 1 kg per litre. That water alone wants a filter rated around 220–320 L/h (4–6× turnover) and a heater near 54 W (about 1 W per litre). Scale it up and the weight is what surprises people: a 240 litre tank holds 240 kg of water on its own, before glass, substrate or rock.
StockingHow many fish the tank can actually hold
The oldest rule of thumb in the hobby is about 1 cm of adult fish length per litre of water for a community freshwater tank. On the 48.6 litres of water in a 60 × 30 × 30 cm tank that's roughly 48 cm of adult fish — say eight 4 cm tetras with room spare, or a small school plus a bottom-dweller.
It's a planning guide and nothing more. Here's where it breaks:
- Length isn't mass. One 10 cm goldfish is nowhere near ten 1 cm tetras — body volume and waste output rise far faster than length. The rule falls apart on anything chunky.
- Adult size, not shop size. Stock to what the fish becomes. The cute 3 cm common pleco in the tank at the shop is a 40 cm adult that no starter tank can hold.
- Footprint beats volume. A tall, narrow tank holds the same litres as a long, shallow one but gives far less swimming length and surface area for gas exchange. Long and low usually stocks better.
- Species have needs the maths can't see. Schooling fish need numbers, territorial fish need space, and some species need a minimum tank length regardless of litres.
- Goldfish and marine tanks are different worlds. Both need far more water per animal than this rule suggests — don't apply it to either.
Use the number as a ceiling to stay well under, research the adult size and temperament of every species before you buy, and stock slowly — a new filter needs weeks to build the bacteria that handle the waste load.
Weight, stands, filters & heatersWeight, the stand, and sizing your equipment
Water is heavy — the tank is furniture-sized load
Water weighs 1 kg per litre. That single fact makes an aquarium one of the heaviest things in a house: a 240 L tank is 240 kg of water before you add the glass (another 40–50 kg at that size), substrate at roughly 1.5 kg per litre of gravel or sand, and any rock. A modest 200 L setup can land near a quarter of a tonne on a footprint the size of a sideboard.
Stand and floor
Use a stand rated for the tank — a bookshelf or a repurposed cabinet isn't it. The stand must be dead level: an out-of-level tank loads the silicone seams unevenly and is a genuine failure risk, so check with a spirit level and shim before filling. For anything above roughly 200 L, think about the floor: ideally sit the tank across floor joists rather than along a single span, keep it near a load-bearing wall, and get proper advice for upper storeys or older timber floors. And plan the position before filling — a full tank cannot be moved, only drained.
Filtration
Aim for a turnover of about 4–6× the tank volume per hour. Our 54 L example wants a filter rated around 220–320 L/h. Rated flow is measured with an empty, clean filter — real flow drops as media loads up and head height eats into it — so buying at the top of the range, or above it, is the sensible move. Heavily stocked or messy-eating tanks want more; slow-water species want less turbulence, so aim the outflow at the glass.
Heating
Budget roughly 1 watt per litre — about 54 W for the example tank, so an off-the-shelf 50 W or 75 W heater. Go higher if the room runs cold: 1 W/L is comfortable through most of an Australian year, but an unheated room in a Melbourne, Canberra or Hobart winter, or a tank sitting away from any heating, is better served by 1.5 W/L. Two smaller heaters instead of one large one is a common safety habit — if one sticks on or fails off, the other limits the damage.
Water changes
Plan on 20–30% of the water volume weekly for a typical community tank — about 11–16 L on our example, which is a bucket or so. Sizing this at the planning stage is worth doing honestly: the weekly bucket count is the real cost of a big tank, and it's the chore that decides whether the tank stays healthy.
Frequently asked Frequently asked questions
Where these figures come from
The volume, conversion and weight figures are definitions — exact by measurement, not estimates. The stocking, filter, heater and water-change figures are long-standing hobby rules of thumb, useful for planning and no substitute for researching your species.
- Volume — 1 litre ≡ 1,000 cm³, so litres = L × W × H (cm) ÷ 1,000. Exact for a rectangular tank.
- Gallons — 1 US gallon = 3.785 L; 1 imperial (UK) gallon = 4.546 L. Both are exact definitions.
- Weight — fresh water is ~1 kg per litre (1.000 kg/L at 4 °C, ~0.998 at room temperature). Substrate ~1.5 kg per litre of gravel or sand; salt water is ~2.5% heavier than fresh.
- Usable water — ~90% of geometric volume after substrate, hardscape and freeboard; adjustable at the Detailed level.
- Stocking — ~1 cm of adult fish per litre, the traditional community-freshwater guide. Not valid for goldfish, large-bodied species or marine tanks.
- Filtration & heating — turnover ~4–6× tank volume per hour; heater ~1 W per litre (~1.5 W/L in a cold room). Water changes ~20–30% weekly.
- Further guidance — RSPCA Australia — pet care guidance.
Last checked: July 2026. Volume, gallon and weight maths is exact; the stocking, equipment and water-change figures are planning guides. Research every species' adult size and requirements, use a stand rated and levelled for the tank, and check the floor loading for large setups.
Understanding your resultSelect the question that matches where you are right now.
The headline number is your tank's full volume in litres — the geometry of the glass. The breakdown turns that into gallons, the water actually in the tank once substrate and freeboard are allowed for, the filled weight, a stocking guide, and the filter and heater sizes to shop for.
What to do with itUse the litres figure to shop for equipment and the water figure to dose anything. Take the weight to the stand decision before you buy the tank, not after — a filled tank can't be moved, only drained.
What it is notIt's not species advice, and it's not a structural assessment. The stocking figure is a rule of thumb that ignores body mass and behaviour, and the weight figure tells you the load but not whether your floor carries it.
Why litres, not gallonsAustralian tanks, medications and conditioners are all labelled in litres. Convert an American forum figure once, then think in litres — mixing US and imperial gallons is a 20% dosing error waiting to happen.
Four things drive every number on this page: the three dimensions, how much of the tank is actually water, the stocking rule you plan to, and the sheer weight that follows from the litres.
Dimensions & shapeVolume scales with all three dimensions at once, so a small measuring slip compounds. Shape matters too: the same litres in a long, low tank give more swimming length and surface area than in a tall, narrow one.
Fill levelSubstrate, hardscape and freeboard typically take about 10% of the box figure. A deeply scaped tank takes more — and dosing to the box size then overdoses the water that's really there.
Stocking rule & weightThe cm-of-fish-per-litre rule is a ceiling to stay under, not a target to hit — lower it for big-bodied or messy species, and ignore it entirely for goldfish or marine. Weight follows litres exactly at 1 kg/L, which is why the stand and the floor are a bigger constraint on tank size than the budget usually is.
A few habits keep the sums honest and the tank healthy.
Measure, don't trust the labelAdvertised tank sizes are rounded and often quote the geometric volume. Measure the glass yourself and use the water figure for dosing — it's the one that matters.
Level the stand before fillingCheck with a spirit level and shim as needed. An out-of-level tank loads the silicone seams unevenly, and that's a failure you only get to have once.
Buy filter capacity, stock slowlyRated flow drops as media clogs, so size at the top of the 4–6× range. Then add fish over weeks, not days — the filter's bacteria need time to catch up with the waste load.
A tank is a setup cost plus a running cost. Model the rest of the pet budget and the household outgoings around it.
Feeding another petWorking out portions for a dog or cat?
Pet food portions → The whole householdSee how pet care fits your monthly running costs.
Cost of living → A buffer for the vet billBuild a rainy-day fund for the unexpected.
Emergency fund → Related calculators 🥣Pet Food PortionHow much to feed 🐶Puppy CostFirst-year budget 🐕Dog AgeDog years, properly 🐈Cat AgeCat years, properly 🧾Cost of LivingHousehold running costs 🛟Emergency FundRainy-day buffer You might also be interested in 🥣Pet Food PortionFeed by the numbers 🐶Puppy CostPlan for a puppy 🐕Dog AgeIn human years 🐈Cat AgeIn human years 🧾Cost of LivingBudget the whole home 📊Net WorthYour full picture Rate this calculatorQuick answers
How many litres is my tank? 60×30×30 cm ≈ 54 L
Tank volume in litres is length × width × height in centimetres, divided by 1000. A common 60 × 30 × 30 cm tank is 54 litres; a 120 × 40 × 50 cm tank is 240 litres. That's the total glass volume — the actual water is a bit less once you add substrate and leave a few centimetres of freeboard at the top. Always measure the internal dimensions, not the outside, for the most accurate figure.
| Formula | L×W×H ÷ 1000 |
|---|---|
| 60×30×30 | 54 L |
| 120×40×50 | 240 L |
- Measure Internal dimensions
- Water A bit under total
Litres to gallons 54 L ≈ 14 US gal
A lot of aquarium equipment and advice — especially online — is rated in US gallons. To convert, divide litres by 3.785: a 54-litre tank is about 14 US gallons, and 240 litres is about 63. (Watch out for imperial UK gallons, which are larger at 4.546 litres.) Filter and heater sizing guides usually assume US gallons, so convert before you match a product to your tank.
| US gallon | 3.785 L |
|---|---|
| 54 L | ~14 US gal |
| UK gallon | 4.546 L |
- Most gear US gallons
- Convert Before buying
How many fish can I keep? ~1 cm of fish per litre
The old rule of thumb is about 1 cm of adult fish length per litre of water for a community freshwater tank — so a 54-litre tank might hold around 48 cm of small fish once you allow for substrate. It's only a rough starting point: heavily planted tanks and strong filtration support more, while big or messy fish, and body shape, mean far less. Always research each species' adult size and needs before stocking.
| Guide | ~1 cm fish/L |
|---|---|
| 54 L tank | ~48 cm fish |
| It's a | Rough guide only |
- Planted + filtered More
- Big/messy fish Far less
How much does a full tank weigh? 1 litre = 1 kg
Water weighs one kilogram per litre, so a filled tank is heavy — and that's before substrate, rocks and the glass itself. A 240-litre tank holds 240 kg of water alone and can top 300 kg all up. This is a safety issue, not a detail: the tank needs a purpose-built, perfectly level stand, and on an upper floor you should consider the floor's load rating. Never put a large tank on furniture not made for it.
| Water | 1 kg per litre |
|---|---|
| 240 L water | 240 kg |
| Filled all up | ~300 kg+ |
- Needs A proper stand
- Upper floor? Check load rating
Sizing a filter and heater Turnover + ~1 W/L
Match equipment to your water volume. A filter should turn over roughly 4–6 times the tank volume per hour — for a 54-litre tank that's a filter rated around 220–320 litres/hour. Heaters run about 1 watt per litre in a normally heated room, so a 54-litre tank needs roughly a 50 W heater and a 240-litre tank around 200–300 W (often split across two heaters for safety and even heat). Bigger is generally safer than under-sized.
| Filter turnover | 4–6× volume/hr |
|---|---|
| 54 L filter | ~220–320 L/hr |
| Heater | ~1 W/L |
- Under-filtered Poor water quality
- Big tank Two heaters
Water changes and dosing ~20–30% of volume weekly
Knowing your volume makes maintenance exact. A typical weekly water change is 20–30% of the tank — about 11–16 litres on a 54-litre tank — and water conditioner, fertiliser and medication are all dosed per litre, so an accurate volume stops you over- or under-treating. Remember to dose for the actual water volume (the usable figure), not the tank's total glass capacity, especially in a heavily decorated tank.
| Weekly change | 20–30% |
|---|---|
| 54 L tank | ~11–16 L |
| Dose per | Litre of water |
- Dose on Usable volume
- Accurate volume Correct dosing
Worked examples
| Inputs | Volume | Note |
|---|---|---|
| A 60 × 30 × 30 cm tank | 54 L | 54 litres, about 14 US gallons |
FAQFrequently asked questions
How many litres is my aquarium?
Measure the length, width and height in centimetres, multiply them together and divide by 1,000. That works because one litre is exactly 1,000 cubic centimetres. A common starter tank at 60 × 30 × 30 cm is 54,000 cm³, which is 54 litres. That's the tank's full geometric volume — the actual water is less once substrate, rocks and the gap you leave at the top (the freeboard) are taken out, so a realistic figure is about 90% of it, or roughly 48.6 litres in this example.
How do I convert litres to gallons?
Divide litres by 3.785 for US gallons, or by 4.546 for imperial (UK) gallons. A 54 litre tank is about 14 US gallons or about 12 imperial gallons. Don't mix the two up: most aquarium hobby content online is American, so a "ten gallon tank" almost always means about 38 litres, not 45. Australian shops sell tanks in litres, so convert once and stick with litres for dosing medications and water conditioners.
How many fish can my tank hold?
A rough starting point for a community freshwater tank is about 1 cm of adult fish length per litre of water. On 48.6 litres of actual water that's around 48 cm of adult fish — for example eight small tetras of about 4 cm each, with room to spare. Treat it strictly as a guide, not a rule: it ignores body mass (a 10 cm goldfish is nothing like ten 1 cm tetras), territory, schooling needs and how much waste a species produces. Research the adult size and requirements of every species before you buy, and stock slowly while the filter matures.
How much does a full fish tank weigh?
Water weighs 1 kg per litre, so a 240 litre tank holds 240 kg of water alone — before the glass, which on a tank that size can add another 40–50 kg, plus substrate at roughly 1.5 kg per litre of gravel or sand, and rocks. A filled tank is one of the heaviest objects in a home and its weight lands on a small footprint. Use a stand rated for the tank, make sure it's level (an out-of-level tank stresses the seams), and for anything above roughly 200 litres think about the floor underneath — ideally sit it across floor joists rather than along a single span, and get advice for upper storeys.
What size filter and heater do I need?
For filtration, aim for a turnover of about 4–6 times the tank volume per hour: a 54 litre tank wants a filter rated around 220–320 litres per hour. Rated flow drops as media clogs, so buying at the top of the range is sensible. For heating, budget roughly 1 watt per litre — about 54 W for that tank, so a standard 50 W or 75 W heater. Push higher if the room gets cold in winter or the tank sits away from heating; most of Australia is mild enough that 1 W/L is comfortable, but an unheated room in a Melbourne or Hobart winter benefits from more. Sources
The sources behind this calculator
- American Association of Feline Practitioners — Feline Life Stage Guidelines — the six feline life stages the cat-age page uses
- Wang et al. 2020, Cell Systems — Quantitative translation of dog-to-human aging by conserved remodeling of the DNA methylome — the 16·ln(age)+31 epigenetic formula on the dog-age page
- Fair Work Ombudsman — sets hospitality award wages — why tipping is optional in Australia
Last checked: September 2026. Where a page states a convention (a tipping custom, a pet life stage), the page names the body it follows.