Yards to Feet Converter
Convert yards to feet — multiply by three, exactly. Results update as you type; exact factors shown.
One yard is 3 feet — see the exact factor, not a rounded rule of thumb.
How the yards to feet converter works
Every length is converted through the metre, the SI base unit of length. The inch has been defined as exactly 25.4 mm since the 1959 international yard and pound agreement, so a foot is exactly 0.3048 m, a yard 0.9144 m and a statute mile 1,609.344 m. The nautical mile is 1,852 m by international definition.
Australia is fully metric under the National Measurement Act 1960; imperial units appear only in trade with the US and in older documents.
Common length conversions
| From | To | Units |
|---|---|---|
| 1 yd | 3 ft | yard to feet |
| 2 yd | 6 ft | yards to feet |
| 3 yd | 9 ft | yards to feet |
| 5 yd | 15 ft | yards to feet |
| 10 yd | 30 ft | yards to feet |
| 20 yd | 60 ft | yards to feet |
| 25 yd | 75 ft | yards to feet |
| 50 yd | 150 ft | yards to feet |
| 75 yd | 225 ft | yards to feet |
| 100 yd | 300 ft | yards to feet |
| 200 yd | 600 ft | yards to feet |
| 500 yd | 1,500 ft | yards to feet |
Units in this converter and their exact factors
| Unit | Symbol | One unit in metres |
|---|---|---|
| millimetre | mm | 0.001 metre |
| centimetre | cm | 0.01 metre |
| metre | m | 1 metre |
| kilometre | km | 1,000 metre |
| inch | in | 0.0254 metre |
| foot | ft | 0.3048 metre |
| yard | yd | 0.9144 metre |
| mile | mi | 1,609.344 metre |
| nautical mile | nmi | 1,852 metre |
FAQFrequently asked questions about length conversion
How many feet in a yard?
Exactly 3.
What is 50 yards in feet?
150 feet.
How many feet is a football field?
300 feet — 100 yards between the goal lines.
Why buy by the yard?
Fabric, carpet, topsoil and concrete are priced per yard or cubic yard by convention, even where the job is measured in feet.
What is a cubic yard in cubic feet?
27 cubic feet, because three cubed is 27.
Where these figures come from
- BIPM — The International System of Units (SI Brochure, 9th edition) — definitions of the base and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of Units — the exact conversion factors used here.
- National Measurement Institute (NMI) — Australia's national measurement authority.
Last checked: September 2026. Conversion factors are fixed by definition and do not change with tax years or regulations.